● Rohs requirements.
●105℃ 2000 hours series.
● Used for switching power supply, servo, inverter, and other industrial products.
| Item | Characteristic | ||||||||||
| Operating temperature range | -40℃～+105℃ | -25℃～+105℃ | |||||||||
| Rated voltage(WV/V) | 63V～450V | 460V～550V | |||||||||
| Capacitance(CAP/C) | 68～10000 | ||||||||||
| Tolerance(CAP/C) | ±20% (25℃, 120Hz) | ||||||||||
| Leakage current LC/I(25℃，120Hz) | LC≤0.01CV(uA) or 1.5mA, whichever is smaller (25℃, 5min) C=Nominal capacitance(μF),V=Working voltage(V) | ||||||||||
| Dissipation factor DF/tanδ(25℃，120Hz) | UR(V) | 63 | 80～100 | 160～450 | 460～550 | ||||||
| DF | 0.25 | 0.2 | 0.15 | 0.15 | |||||||
| Temperature characteristics (Impedance ratio at 120Hz) | UR(V) | 63~100 | 160~200 | 250~450 | 460~550 | ||||||
| Z(-25℃/Z(+25℃) | 4 | ||||||||||
| Z(-40℃/Z(+25℃) | 15 | 10 | 8 | - | |||||||
| Temperature characteristics (Capacitance ratio at 120hz) | C(-40℃/C(+25℃)≥0.6 | ||||||||||
| C(-25℃/C(+25℃)≥0.7 | |||||||||||
| Working lifetime | Standard lifetime | Durability | High temperature storage | ||||||||
| Load Time | 4000h | >180000h | 2000h | 3000h | 1000h | ||||||
| Leakage current | Within rated specification value | Within rated specification value | Within rated specification value | Within rated specification value | |||||||
| Capacitance change | Within ±30% of initial value | Within ±20% of initial value | Within ±20% of initial value | Within ±20% of initial value | |||||||
| Dissipation factor | Within 300% of rated specification value | Within 200% of rated specification value | Within 200% of rated specification value | Within 200% of rated specification value | |||||||
| Environmental condition: Applied voltage | UR | UR | UR | UR | UR＝0 | Apply the rated operating voltage UR30 minutes and test after 24 hours of recovery. | |||||
| Applied currentt | IR | 1.2×IR | IR | IR＝0 | IR＝0 | ||||||
| Application temperature | 105℃ | 40℃ | 105℃ | 105℃ | 105℃ | ||||||
■Ripple current correction factor
■ Outline drawing Unit：Mm
(1).jpg "LHS 450V 330uf 105℃ 2000 hours,standard snap-in capacitor.")
Produkt empfehlen
LHS 400V 1000uf 105℃ 2000H standard snap-in capacitor.
● Rohs requirements.
●105℃ 2000 hours series.
● Used for switching power supply, servo, inverter, and other industrial products.
LHS 450V 330uf 105℃ 2000 hours,standard snap-in capacitor.
● Rohs requirements.
●105℃ 2000 hours series.
● Used for switching power supply, servo, inverter, and other industrial products.
LKS 450 V 470 uf 85 ℃ 2000 Stunden, Standard-Snap-In-Kondensator
● Rohs-Anforderungen.
● 85℃ 2000-Stunden-Serie.
● Wird für Schaltnetzteile, Servos, Wechselrichter, Klimaanlagen, Filterschaltungen, Laserschweißmaschinen, Unterhaltungselektronik sowie Leiterplatten und andere allgemeine Industrieprodukte verwendet.
LPS 450v 8200uf 85℃ 2000 hours standard screw capacitor
● Rohs requirements.
● 85℃ 2000 hours series.
● Used for switching power supply, servo, frequency converter, air conditioning,
filter circuit, laser spot welding machine, consumer electronics, printed circuit
board and other general industrial products.
LPS 450v 5600uf 85℃ 2000 hours standard screw capacitor
● Rohs requirements.
● 85℃ 2000 hours series.
● Used for switching power supply, servo, frequency converter, air conditioning,
filter circuit, laser spot welding machine, consumer electronics, printed circuit
board and other general industrial products.
Neueste Nachrichten
Welche Kondensatoren verarbeiten die Eckfrequenz
May 30, 2024
Kondensatoren spielen eine entscheidende Rolle in elektronischen Schaltkreisen und beeinflussen verschiedene Parameter, einschließlich der Eckfrequenz, die für das Filterdesign von entscheidender Bedeutung ist.
May 23, 2024
Achten Sie auf die Nennwerte (Kapazität und Spannung) der Elektrolytkondensatoren vor dem Einbau. Bestätigen Sie vor der Installation die Polarität der Elektrolytkondensatoren.
Kondensator mit Schraubanschluss
May 16, 2024
Einführung in Schraubanschlusskondensatoren und ihre einzigartigen Eigenschaften. Schraubanschlusskondensatoren sind Kondensatoren, die aus Metallschrauben und Isolierpads bestehen und typischerweise in Schaltkreisen mit hoher Spannung und hohem Strom verwendet werden.
Füllen Sie unser Formular aus, um ein individuelles Angebot zu erhalten und herauszufinden, wie das Expertenteam von Liron Ihre spezifischen Anforderungen erfüllen kann. Ihre optimale Lösung ist nur einen Klick entfernt!
English 
中文 
Русский 
عربي 
Español 
Français 
100_100.webp "400V 820uf")
-tuya100_100.webp "400V 820uf")
100_100.webp "400V 820uf")
